Gine-gine Fadada Karfe
Ƙarfe ɗin da aka faɗaɗa na gine-gine ya haɗa da ragar rufi, ragar facade, ragar sararin samaniya, ragar shelves, ragar kayan ɗaki, ragar gini
I. Ƙarfe mai Faɗaɗɗe don Facade Cladding Mesh
Abubuwan gama gari na facade cladding raga sune takardar galvanized da takardar aluminum.Waɗannan kayan suna da ɗorewa kuma suna da juriya mai kyau.Bugu da ƙari, saboda ƙaƙƙarfan gyare-gyare na kayan aiki, yana da kyakkyawar samun iska da tasirin shading a matsayin kayan ado na waje na waje.Kuma ta hanyar matakai daban-daban na sana'a don samarwa, tasirin shigarwa yana da kyau da kyau.Yana da kyawawan tasirin anti-static da rigakafin wuta kuma yana da nauyi a cikin nauyi.Siffar zane-zane na gine-gine yana da sauƙi don ƙirƙirar, kulawa da shigarwa.Saboda tasirin kayan ado na bangon labule yana bayyane sosai, yana da zaɓi mafi hikima don mutane su shigar.
| Facade Cloding Mesh | ||||
| KYAUTATA | GIRMAN MESH(mm) | |||
| SWD | LWD | STRAAND FIDTH | KASHIN KASHI | |
| Aluminum karfe | 85 | 210 | 25 | 2 |
| Aluminum karfe | 38 | 80 | 10 | 2 |
| Aluminum karfe | 38 | 80 | 10 | 2 |
| Aluminum karfe | 35 | 100 | 10 | 2 |
| Aluminum karfe | 30 | 100 | 15 | 2 |
| Aluminum karfe | 15 | 45 | 2 | 1.2 |
II.Rufin Rufe
Za a iya keɓance ragar rufin cikin raga tare da kowane girman rami da haɗin sifofin ramu kyauta bisa ga buƙatun abokin ciniki.Yana da iska mai ƙarfi da tsaro mai ƙarfi.Akwai lambobi akan kowane shinge na ƙarfe na rufi don tabbatar da aminci wanda ya dace da kayan ado na waje da kayan ado na cikin gida.Kuma akwai nau'ikan launuka daban-daban don zaɓinku.Bayan duk tsari na jiyya na saman, ragar ƙarfe da aka faɗaɗa yana da ban mamaki kuma yana da kyau, kuma yana iya saduwa da bukatun daban-daban na mutane daban-daban.Launuka na yau da kullun sune: rawaya, fari, shuɗi, ja, kore, launin toka, zinari, da sauransu. Idan kuna buƙatar wasu launuka, zamu iya yin su gwargwadon bukatunku.
| Rufi raga | ||||
| KYAUTATA | GIRMAN MESH(mm) | |||
| SWD | LWD | STRAAND FIDTH | KASHIN KASHI | |
| Aluminum karfe | 14 | 20 | 2.5 | 1 |
| Aluminum karfe | 12 | 25 | 4.5 | 1.5 |
| Aluminum karfe | 17 | 35 | 3 | 1.8 |
| Aluminum karfe | 17 | 45 | 4.7 | 2.8 |
| Aluminum karfe | 17 | 35 | 3.4 | 1.5 |
| Aluminum karfe | 12 | 25 | 3 | 1.4 |
III.Rukunin Gina
Ana amfani da ragamar ginin don zanen bango da rataye ash don ƙarfafa bangon ginin.An yi shi da karfe na aluminum, galvanized karfe da bakin karfe da dai sauransu. Mafi yawan siffar rami na stucco raga shine lu'u-lu'u.
| Rukunin Gina | |||
| KYAUTATA | GIRMAN MESH(mm) | ||
| SWD | LWD | TSAYI | |
| Galvanized karfe | 10 | 20 | 1.22-1.25 |
| Galvanized karfe | 12 | 25 | 1.22-1.25 |
| Galvanized karfe | 8 | 16 | 1.22-1.25 |
| Galvanized karfe | 5 | 10 | 1.22-1.25 |
| Galvanized karfe | 4 | 6 | 1.22-1.25 |
| Galvanized karfe | 7 | 12 | 1.22-1.25 |
Aikace-aikace
Gilashin rufin facade yawanci yana da kyawawan alamu iri-iri waɗanda ke sa tasirin kayan ado ya zama na musamman.Ba wai kawai aikin samun iska yana da kyau ba, amma har ma yana da tasirin shading mai kyau.Kuna iya samun wasu gine-gine suna da kyan gani da kasuwa, wanda galibi saboda zaɓin faɗaɗa ragar ƙarfe don ado na waje.Dangane da wannan zaɓin, yana sa bayyanar ginin ya zama mai salo, kyakkyawa kuma mafi ƙwarewa.
Rufin rufi yawanci ana yin shi azaman farantin alumini na saƙar zuma don haɗawa daga rufin.Tsarin shigarwa yana da ɗan gajeren lokaci, wanda shine tsarin haɗin keel mai layi ɗaya na hanya ɗaya.Yana sa haɗin rufin ya fi tsaro.An rufa-rufe tsakanin ragar a jere.A lokaci guda, ƙirar ƙugiya a gefen raga na iya sarrafa motsi tsakanin ragar, wanda ya kara tabbatar da cewa haɗin da ke tsakanin ragar ya fi dacewa da santsi.
Ana amfani da shingen shinge na ginin a matsayin ƙarfafa bango.Lokacin gudanar da aikin gini, stucco guda ɗaya ya faɗaɗa raga, ƙarin aminci don gini.
