We supply high-precision Micro Expanded Metal Mesh (Microporous Steel Mesh), ultra-fine continuous integrated expanded metal with tiny uniform diamond apertures below 1mm. Produced by precision slitting & stretching without cutting scraps, this mesh integrates lightweight, high structural strength, uniform ventilation and precise filtration performance. Widely used as filter support, battery current collector, EMI shielding, speaker grille and micro ventilation panel for electronics, new energy, filtration, medical and audio industries. Standard fine mesh specifications in stock, customized thickness, aperture, flattening and OEM processing services available for global precision equipment manufacturer
Production Craft & Structural Features
This microporous expanded metal adopts full-automatic precision micro-slitting stretching rocess, one-piece forming with no weld joints, loose wires or shedding fragments. Two finished types: raised original mesh and flattened smooth mesh for different flat installation demands. Ultra-fine strand & tiny diamond holes form dense uniform mesh surface, balanced open area to realize air/liquid penetration while blocking fine particles. Edges are neatly trimmed without sharp burrs; material can be arbitrarily cut, bent, rolled, stamped into round sheets, frames and special-shaped parts without cracking. No material waste during production, more cost-effective than micro perforated sheet.
Raw Materials & Complete Technical Specifications
Optional Base Materials
- Low Carbon / Galvanized Steel: Low cost, filter support, general ventilation & machinery shielding
- SUS304 / SUS316L Stainless Steel: Acid, alkali & salt fog resistant, for chemical filtration, medical equipment, coastal electronics
- Aluminum Alloy: Ultra-light, good heat dissipation, speaker grilles & electronic heat dissipation panels
- Copper / Nickel / Titanium: High conductivity & corrosion resistance, battery electrodes, EMI shielding, new energy electrolysis plates
Core Standard Parameters
- Sheet Thickness: 0.03mm–1.5mm ultra-thin foil to medium plate customizable
- Micro Diamond Aperture (SWD×LWD): 1×2mm, 2×3mm, 3×6mm, ultra-fine 0.3×0.5mm
- Strand Width: 0.2mm–1.8mm adjustable
- Surface Treatment: Hot-dip galvanizing, electro-galvanizing, anodizing, polishing, PTFE coating
- Mesh Form: Raised expanded mesh / flattened smooth micro mesh
- Standard Sheet Size: 1000×2000mm, custom roll & cut-to-size sheets supported
Core Competitive Advantages
✅ Integrated Joint-Free Structure
Continuous monolithic metal without broken wires, far higher tensile strength than woven mesh, no deformation under long-term vibration.
✅ Ultra-Fine Uniform Micropores
Consistent tiny diamond openings achieve precise separation of fine dust & particles, ideal support layer for filter paper & filter cotton.
✅ High Strength-to-Weight Ratio
Light thin plate with rigid 3D mesh skeleton, reduces equipment load while maintaining structural stability.
✅ Excellent Conductive & Shielding Performance
Copper/aluminum micro mesh delivers stable EMI/RFI shielding, widely used for electronic anti-interference components and battery conductive grids.
✅ No Production Waste & Economical
Slit-stretch forming generates zero metal scraps, lower unit cost than laser micro-perforated panels.
✅ Easy Deep Processing
Good ductility for cutting, bending, stamping, welding and rolling, fit automatic assembly of precision equipment.
✅ Multi-Environment Corrosion Resistance
Stainless steel/titanium grades adapt to high humidity, chemical liquid and high-temperature working conditions.
Wide Application Scenarios
- Filtration Industry: Inner & outer protective support mesh for air filter cartridges, dust filters, water purification filters
- New Energy Battery: Lithium battery electrode collector, electrolytic cell titanium mesh anode, fuel cell gas diffusion layer
- Electronic & Communication: EMI shielding mesh for circuit boards, 5G equipment heat dissipation panels
- Audio Equipment: Ultra-fine speaker grilles, microphone sound-permeable protective covers
- Medical & Chemical: Medical device micro ventilation screens, fine chemical liquid filter separators
- Precision Machinery: Instrument ventilation panels, equipment dust-proof isolation mesh, micro oil filter screens
Customization & Global Export Service
Custom metal material, sheet thickness, micro aperture, flattened/raised style, finished round discs, frames and branded logo stamping per customer drawings. Free mesh samples, thickness & aperture test reports provided. Strict inspection of mesh uniformity, flatness and tensile strength before shipment, waterproof film wrapped sheets + export wooden pallet packaging. Mixed container loading with air filter, dust filter cartridge and other metal mesh products to cut ocean freight.
Our micro expanded metal mesh is exported to Southeast Asia, Middle East, Europe, North America and Australia. We maintain long-term stable cooperation with filter manufacturers, new energy battery factories, electronics assembly plants and medical equipment suppliers worldwide.
Company Profile
We are a professional metal deep processing manufacturer integrating R&D, production and export, covering micro expanded metal, ordinary expanded metal, perforated metal plate, anti-slip tread plate and full series industrial filter elements. Equipped with precision micro slitting, flattening and surface treatment production lines, we provide one-stop precision metal mesh solutions for global industrial customers.
Post time: Jun-22-2026