Top and Bottom Filter End Caps Set with/without Bolts—Anping Dongjie Wire Mesh

filter end caps specification

The filter end caps is one of the important components of the filter element, with great demand and general dimensional accuracy requirements, but the outer surface shall not have visible bumps and scratches, and the formed part shall not have defects such as crack, wrinkle and deformation. It is easy to install during assembly

The filter end caps of the filter element mainly play the role of sealing both ends of the filter material and supporting the filter material. The steel plate is mainly pressed into various shapes as required. The filter element is installed on the vehicle and engine, which will produce vibration during mechanical operation, and the air filter will bear great stress. The filter end caps can effectively improve the bearing capacity of the filter material, Generally, one side of the filter end caps is stamped into a groove that can place the end face of the filter material and the adhesive, and the other side is bonded with a rubber seal to seal the filter material and seal the channel of the filter element. The filter end caps is made of steel plate, plastic and foamed polyurethane, in which the foamed polyurethane can be heat sealed with the filter material directly with a mold, so as to save the adhesive and sealant strip.

The materials used to produce filter end caps include galvanized steel, anti-fingerprint steel, stainless steel, and many other materials. The filter end caps have various shapes as different needs. Each of the three materials has its own advantages.

Galvanized steel is coated with zinc oxide to prevent rusting since the chemical compound takes far longer to corrode than steel. It also changes the steel’s appearance, giving it a rugged look. Galvanization makes the steel stronger and harder to scratch.

Anti-fingerprint steel is a kind of composite coating plate after fingerprint-resistant treatment on the surface of galvanized steel. Because of its special technology, the surface is smoother and it is non-toxic and environmentally friendly.

Stainless steel is material that anti-corrosion to the air, vapor, water and acid, alkali, salt, and other chemical corrosion media. The common kinds of stainless steel include 201, 304, 316, 316L, etc. It has no rust, long service life, and other characteristics.

 For the specificationsthere are parts sizes for reference, not all. Welcome to contact us for further discussion.

 

Filter End Caps

Outer Diameter

 Inside Diameter

200

195

300

195

320

215

325

215

330

230

340

240

350

240

380

370

405

290

490

330

img (6) img (9) img (13)
img (3) img (4) img (12)

 Applications

The filter element is mounted on a vehicle, engine or mechanical device. During the operation of the machine, vibration is generated, the air filter is subjected to a large stress, and the end cover can effectively improve the bearing capacity of the material. The filter end cover is generally used in the air filter, dust filter, oil filter, truck filter, and active carbon filter

img (2) img (7)
img (5) img (8)

That's all for today's introduction. After that, Dongjie Wire Mesh will continue to bring you relevant information about the metal mesh industry.

If you are interested, please continue to follow us! At the same time, if you have related product purchase needs, please feel free to contact us, we will answer you online 24 hours a day.


Post time: Jun-24-2022