ODM Anti-Fingerprint Filter Metal End Caps for Air Filters

Short Description:

The end cap of the filter element mainly plays the role of sealing the two ends of the filter material and supporting the filter material.
1. The size is accurate, and customization is acceptable.
2. High-quality raw materials, wide application range and stable quality.
3. Fast delivery and guaranteed after-sales service.


Product Detail

About Us

Certifications

FAQ

Product Tags

ODM Anti-Fingerprint Filter Metal End Caps for Air Filters

The filter end cap mainly serves to seal both ends of the filter material and support the filter material. It stamped into various shapes as needed from the steel sheet. The end cap is generally stamped into a groove on which the end face of the filter material can be placed and an adhesive can be placed, and the other side is bonded with a rubber seal to function to seal the filter material and seal the passage of the filter element.

1. For the productionDongjie Supplied filter end caps include filming, molding, blanking sheets, and punching. The picture of the production process is as below:

  img (1)

2.The materials used to produce filter end caps include galvanized steel, anti-fingerprint steel, stainless steel, and many other materials. The filter end caps have various shapes as different needs. Each of the three materials has its own advantages.

Galvanized steel is coated with zinc oxide to prevent rusting since the chemical compound takes far longer to corrode than steel. It also changes the steel’s appearance, giving it a rugged look. Galvanization makes the steel stronger and harder to scratch.

Anti-fingerprint steel is a kind of composite coating plate after fingerprint-resistant treatment on the surface of galvanized steel. Because of its special technology, the surface is smoother and it is non-toxic and environmentally friendly.

Stainless steel is material that anti-corrosion to the air, vapor, water and acid, alkali, salt, and other chemical corrosion media. The common kinds of stainless steel include 201, 304, 316, 316L, etc. It has no rust, long service life, and other characteristics.

3. For the specificationsthere are parts sizes for reference, not all. Welcome to contact us for further discussion.

filter end caps specification

 

Filter End Caps

Outer Diameter

 Inside Diameter

200

195

300

195

320

215

325

215

330

230

340

240

350

240

380

370

405

290

490

330

img (6) img (9) img (13)
img (3) img (4) img (12)

4. Applications

The filter element is mounted on a vehicle, engine or mechanical device. During the operation of the machine, vibration is generated, the air filter is subjected to a large stress, and the end cover can effectively improve the bearing capacity of the material. The filter end cover is generally used in the air filter, dust filter, oil filter, truck filter, and active carbon filter

img (2) img (7)
img (5) img (8)

  • Previous:
  • Next:

  • aboutusimg

    ANPING DONGJIE WIRE MESH PRODUCTS CO., LTD

    We are a specialized manufacturer for the development, design and production of expanded metal mesh, perforated mesh, and other wire mesh products over 24 years’ experience. Dongjie has adopted ISO9001:2008 Quality System Certificate, SGS Quality System Certificate and modern management system.
    Anping Dongjie Wire Mesh Products Factory is founded in 1996 with over 10, 000 sqms areas. We have more than 100 professional workers and 4 professional workshops: expanded metal mesh workshop, perforated workshop, stamping wire mesh products workshop ,molds made and deep-processing workshop.
    feedback
    As always stuck into “Quality Proves Strength, Details Reach to Success”, Dongjie has achieved highly acclaim in the old and new customers. 

    cer

    Q1: Are you a manufacturer or a trader?

    A1: We are a professional manufacturer of wire mesh products. We have been specialized in wire mesh for decades and accumulated rich experiences in this field.
    Q2: How to make an inquiry?
    A2: You need to provide material, sheet size, hole size and the quantity to ask an offer. You can also indicate if you have any special requirement.
    Q3: Could you provide free sample?
    A3: Yes, we can provide free sample in half A4 size together with our catalog. But the courier charge will on your side. We’ll send back the courier charge if you make an order.
    Q4: How is your Payment Term? 
    A4: Generally, our payment term is T/T 30% in advance and the balance 70% against the copy of B/L. Other payment terms we can also discuss.
    Q5: How is your delivery time? 
    A5: ①We always prepare enough stock material for your urgent requirement, the delivery time is 7 days for all the stock material. ② According to quantity and technology you required for the non-stock items to offer you the exact delivery time and producing schedule.
  • Write your message here and send it to us