nke China Modern kwụsịtụrụ uko perforated metal ntupu factory factory na suppliers |Dongjie
0086-15930870079 admin@dongjie88.com
  • WhatsApp 1
  • Ntupu waya Dongjie
  • waya ntupu
  • waya ntupu
  • waya ntupu
  • youtube
English

Uko ụlọ nke oge a kwụsịtụrụ gbawara ụlọ ọrụ ntupu igwe

Uko ụlọ a kwụsịrị n'oge a gbawara igwe ntupu ụlọ ọrụ egosipụtara onyonyo
  • Uko ụlọ nke oge a kwụsịtụrụ gbawara ụlọ ọrụ ntupu igwe
  • Uko ụlọ nke oge a kwụsịtụrụ gbawara ụlọ ọrụ ntupu igwe
  • Uko ụlọ nke oge a kwụsịtụrụ gbawara ụlọ ọrụ ntupu igwe

Nkọwa dị mkpirikpi:

Uko ụlọ nke oge a kwụsịtụrụ gbawara ụlọ ọrụ ntupu igwe
Ulo elu nke aluminom nwere ezigbo nnabata ụda na mmetụta mkpuchi ụda, ike na-egbochi uzuzu, ọkụ na-egbochi mmiri, na-arụ ọrụ mgbochi corrosion, na elu osisi nwere mmetụta nhazi dị mma.
Dịka onye nrụpụta ọkachamara, Dongjie nwere ike gboo mkpa gị niile, bia kpọtụrụ anyị.
WhatsApp/WeChat :+8613363300602
email:admin@dongjie88.com
Weebụsaịtị: www.dj-metal-mesh.com


  • Ihe:Aluminom, igwe anaghị agba nchara, galvanized ígwè, wdg.
  • Njikwa ogo:Asambodo ISO;Asambodo SGS
  • Ọgwụgwọ elu:Ihe mkpuchi ntụ ntụ, mkpuchi PVDF, Galvanization, Anodizing, wdg.
  • Ọrụ mgbe ire ere:Akuko ule ngwaahịa, ntinye n'ịntanetị.
    • Whatsapp: 0086-15930870079 Budata dị ka PDF

    Nkọwa ngwaahịa

    Mkpado ngwaahịa

    akara ngosi

    Uko ụlọ nke oge a kwụsịtụrụ gbawara ụlọ ọrụ ntupu igwe

    Ụlọ elu ntupu n'ogbe

    ⅠNkọwa ngwaahịa

    Ígwè ndị gbawara agbawa dị mma maka ịgbasa ụda, mkpuchi ụda, na ibelata ikuku ikuku.
    Mgbe etinyere ya na uko ụlọ, ígwè nwere oghere nwere ike inye aka gbochie nkwughachi.Enwere ike iji ya dị ka ihe mkpuchi mkpuchi maka ihe egwu egwu nke e mere ka ọ ṅaa ntị ma ọ bụ gosipụta ụda ma ọ bụ gbasaa ya n'ụzọ a kapịrị ọnụ.
    Aha ngwaahịa Uko ụlọ nke oge a kwụsịtụrụ gbawara ụlọ ọrụ ntupu igwe
    Ihe onwunwe Aluminom, igwe anaghị agba nchara, nwa ígwè, galvanized ígwè, ọla kọpa / ọla, wdg.
    Ụdị oghere Gburugburu, Square, Hexagonal, Cross, Triangular, Oblong, wdg.
    Nhazi nke oghere Kwụ ọtọ;Akụkụ Stagger;Ọgwụgwụ Stagger
    Ọkpụrụkpụ ≦ Oghere oghere (iji hụ na oghere zuru oke)
    Mgbapụta Onye zụrụ ahịa ahaziri
    Ọgwụgwọ elu Ihe mkpuchi ntụ ntụ, mkpuchi PVDF, Galvanization, Anodizing, wdg.
    Ngwa - Ihe mkpuchi ihu
    - Mgbidi ákwà mgbochi
    - Architectural ịchọ mma
    - Ụlọ elu
    - Mgbochi mkpọtụ
    - ikuku uzuzu nsu
    - Ụzọ ije na steepụ
    - Nbufe eriri    		 - oche / oche
    - Ihuenyo nzacha
    - Ohere
    - Ramps
    - Gantries
    - nzacha
    - balustrades
    - Nchekwa ụgbụ maka ụgbọ ala
    Ụzọ mbukota - Iji katọn na-ebukọ na mpịakọta.

    - Ịkwakọba na iberibe na osisi / ígwè pallet.
    Njikwa ogo Asambodo ISO;Asambodo SGS
    Ọrụ ire ere Akuko ule ngwaahịa, ntanetị n'ịntanetị.

     

    oghere oghere
    Iwu Mba. Ọkpụrụkpụ (mm) oghere (mm) Oghere (mm)
    DJ-PS-1 0.5 0.5 1.25
    DJ-PS-2 0.8 0.8 1.75
    DJ-PS-3 0.8 1.5 3
    DJ-PS-4 0.8 2 4
    DJ-PS-5 0.8 3 5
    DJ-PS-6 0.8 4 7
    DJ-PS-7 0.8 5 8
    DJ-PS-8 0.8 6 9
    DJ-PS-9 0.8 8 12
    DJ-PS-10 0.8 10 16
    … … … …
    … ahaziri ahaziri ahaziri

    Rịba ama: Data dị na tebụl bụ nkọwa zuru ezu nke ngwaahịa ahụ, anyị nwekwara ike hazie ya dịka ihe ị chọrọ.

    ⅡNgwa

    Ntupu ígwè gbawara agbawa nwere ọtụtụ ihe eji eme ya.Maka ime ụlọ elu, ọ bụghị naanịna-amịkọrọ ụdanana-ebelata mkpọtụ, ma nwekwara otuaesthetic imewe.Ọ bụ nhọrọ gị kacha mma.

    N'otu oge ahụ, a pụkwara iji nchara ígwè ahụ gbawara agbawa maka okporo ụzọ awara awara, ụgbọ okporo ígwè, ụzọ ụgbọ oloko na ụlọ ọrụ obodo ndị ọzọ na-ebu njem na mpaghara ahụ.ihe mgbochi mkpọtụ gburugburu ebe obibi;

    Ma ọ bụ dị ka steepụ, mbara ihu, tebụl, na oche nchebe gburugburu ebe obibi mara mma efere oghere ịchọ mma;

    Enwere ike iji ya dị ka mkpuchi mkpuchi akụrụngwa akụrụngwa, mkpuchi net nke ọma, igwe anaghị agba nchara mkpụrụ osisi na-acha anụnụ anụnụ, ihe mkpuchi nri, yana shelf ụlọ ahịa, tebụl ngosi ihe ịchọ mma na ihe ndị ọzọ.

    perforated n'uko
    perforated-aluminom-elu ụlọ
    prọfesọ-uko ụlọ03
    perforated-uko
    prọfesọ-uko04
    perforated-uko12_副本

    Ⅲ.Gbasara anyị

    Ụlọ ọrụ mmepụta ihe Anping Dongjie waya ntuputọrọ ntọala na 1996, na-ekpuchi ebe 10,000 square mita.
    Ebe ọ bụ na ya guzosie ike karịa25afọ gara aga, ọ ugbu a nwere ihe karịrị100ọkachamara na-arụ ọrụ na 4 ọkachamara ogbako: metal mesh reaming ogbako, metal ntupu stamping ngwaahịa ogbako, ịkpụzi ogbako, na miri nhazi ogbako.
    Ndị ọkachamara na-eme ihe ọkachamara.
    Họrọ anyị bụ nhọrọ kacha mma gị, egbula oge ịkpọtụrụ anyị.

    -igwe mmepụta -

    igwe perforated4
    igwe perforated2
    igwe perforated5
    igwe perforated1
    igwe perforated3

    -Nkwenye ịdị mma akụrụngwa -

    Igwe anaghị agba nchara
    Galvanized
    Mgbochi mkpịsị aka mkpịsị aka ígwè

    ⅣUsoro ngwaahịa

    1-ihe

    Ihe onwunwe

    2 - ịkụ ọkpọ

    Ịkụ ọkpọ

    3-nnwale

    Nwalee

    4- ọgwụgwọ elu

    Ọgwụgwọ elu

    Ngwaahịa 5-ikpeazụ

    Ngwaahịa ikpeazụ

    6 - nkwakọ ngwaahịa

    Nkwakọ ngwaahịa

    7-na-ebu ibu

    Na-ebugo

    ⅤMbukota&nbufe

    perforated metal mbukota
    nnyefe

    Ⅵ.FAQ

    Q1: Kedu otu esi eme ajuju gbasara ntupu igwe mechiri emechi?
    A1: Ịkwesịrị ịnye ihe, nha oghere, ọkpụrụkpụ, nha mpempe akwụkwọ, na ọnụọgụ nke ịrịọ maka onyinye.Ị nwekwara ike igosi ma ọ bụrụ na ị nwere ihe ọ bụla chọrọ.
    Q2: Ị nwere ike ịnye nlele efu?
    A2: Ee, anyị nwere ike inye a free sample na ọkara A4 size ọnụ na anyị katalọgụ.Mana ụgwọ onye ozi ga-adị n'akụkụ gị.Anyị ga-ezighachi ụgwọ akwụkwọ ozi ma ị nye iwu.
    Q3: Kedu ka oge ịkwụ ụgwọ gị dị?
    A3: N'ozuzu, anyị ugwo okwu bụ T / T 30% tupu na itule 70% tupu mbupu.Usoro ịkwụ ụgwọ ndị ọzọ anyị nwekwara ike ikwurịta.
    Q4: Kedu ka oge nnyefe gị dị?
    A4: A na-ekpebikarị oge nnyefe site na teknụzụ na ọnụọgụ ngwaahịa.Ọ bụrụ na ọ dị gị mkpa ngwa ngwa, anyị nwekwara ike ịkọrọ ngalaba mmepụta gbasara oge nnyefe.
  • Nke gara aga:
  • Osote:
    • Dee ozi gị ebe a ziga anyị ya

    Ụdị ngwaahịa