ndi China Modern Design gulu gulu Perforated Zitsulo mauna zokhomakhota zomangira fakitale ndi ogulitsa |Dongjie

Mapangidwe Amakono Ophatikizika Pagulu Lopangidwa Ndi Metal Mesh Facade Cladding

Kufotokozera Kwachidule:

Mapangidwe Amakono Ophatikizika Pagulu Lopangidwa Ndi Metal Mesh Facade Cladding
Khoma lotchinga la perforated mesh ndi chinthu chokongoletsera chokongoletsera, makamaka panyumba zazitali.Khoma lotchinga lopangidwa ndi aluminiyamu yokhala ndi perforated lili ndi zabwino zake zokhala ndi madzi komanso anti-fouling.Mphepo imadutsa, kuchepetsa kukana kwa mphepo pamene ikuwonjezera kukongola kwa maonekedwe, ndipo moyo wautumiki ndi wautali.
Ngati muli ndi zosowa, omasuka kulankhula nafe, tidzakupatsani mtengo woyenera kwambiri komanso ntchito yabwino kwambiri.


  • Zofunika:Aluminiyamu, pepala losapanga dzimbiri, chitsulo chakuda, chitsulo chagalasi, mkuwa / mkuwa, etc.
  • Maonekedwe a Bowo:Round, Square, Hexagonal, Cross, Triangular, Oblong, etc.
  • Kupanga Mabowo:Molunjika;Side Stagger;Kumaliza Stagger
  • Makulidwe:≤ Mabowo awiri (kuti muwonetsetse mabowo abwino)
  • Chitsanzo:Likupezeka
  • Tsatanetsatane wa Zamalonda

    Zolemba Zamalonda

    chizindikiro

    Mapangidwe Amakono Ophatikizika Pagulu Lopangidwa Ndi Metal Mesh Facade Cladding

    I. Mitengo yamitengo

    1. Zipangizo zachitsulo perforated
    2. Makulidwe a zitsulo zobowoleza
    3. Mabowo Patani, diameters, makulidwe a zitsulo perforated
    4. Miyendo(Pakatikati mpaka Pakati) yachitsulo chobowoleza
    5. Pamwamba mankhwala a perforated zitsulo
    6. M'lifupi ndi kutalika pa mpukutu / chidutswa ndi kuchuluka kwake.

    Zinthu zonse zomwe zili pamwambazi ndi zosinthika, titha kupanga makonda kwa makasitomala.Takulandirani kuti mudzafunsidwe zambiri.

    II.Maonekedwe a mabowo kuti afotokozere kwanu

    perforated zitsulo dzenje akalumikidzidwa

    III.Zofotokozera

    Order No.

    Makulidwe

    Bowo

    Phokoso

    mm

    mm

    mm

    DJ-DH-1

    1

    50

    10

    DJ-DH-2

    2

    50

    20

    DJ-DH-3

    3

    20

    5

    DJ-DH-4

    3

    25

    30

    DJ-PS-1

    2

    2

    4

    DJ-PS-2

    2

    4

    7

    DJ-PS-3

    3

    3

    6

    DJ-PS-4

    3

    6

    9

    DJ-PS-5

    3

    8

    12

    DJ-PS-6

    3

    12

    18

    IV.Mapulogalamu

    Kuvala kwa facade

    Pali maubwino ambiri ogwiritsira ntchito mesh yachitsulo yokhala ndi perforated ngati makonde a khoma
    1. Kusankhidwa kwamitundu yosiyanasiyana ya mbale ndi mabowo kumatha kuyambitsa kukongola konse kwa maukonde okhomerera.
    2. Kumangako ndi kosavuta, mapangidwe a zitsulo za perforated ali ndi ndondomeko ya sayansi ndi mapangidwe, zomangamanga ndi zosavuta komanso mofulumira ndipo zotsatira zake ndi zokongola.
    3. Kapangidwe kameneka kamakhala kosavuta, kachitidwe kameneka kamakhala kosavuta, kachitidwe ka chitetezo ndi kapamwamba, ndipo chitetezo chamtsogolo chimakhala chosavuta.
    perforated facade cladding_副本
    perforated facade_副本
    perforatedmetal-facade_副本
    Perforated-Panels-cladding_副本1
    Perforated-Metal-Facade-_副本1

    The kukongoletsa perforated zitsulo pepala ntchito kwambiri, monga matailosi padenga ndi odana kutsetsereka pansi pa nyumba, zipangizo phokoso mayamwidwe mkati, mapanelo infill khonde ndi masitepe njanji, balusters, guardrails, zomangamanga facade cladding, nyumba zomangira kachitidwe, zotchingira zogawa zipinda, matebulo achitsulo, ndi mipando;zophimba zoteteza zida zamakina ndi okamba, mabasiketi a zipatso ndi zakudya, ndi zina.

    Kuyika kwa Facade Kukongoletsa Nyumba Grill ya Barbecue
    Denga / Khoma Lamatani Mipando ngati Mpando/Desk Chitetezo Mpanda
    Micro Battery Mesh Makola a Nkhuku Balustrades
    Zosefera Zosefera Walkway & Stairs Hand Rail Mesh
    Kuphatikiza pa mapulogalamu omwe ali pamwambawa, pali ena ambiri.Ngati muli ndi malingaliro ena, pls tilankhule nafe.

     

    V. Za ife

    Kampani ya Anping Dongjie (1)

    Dongjie atengera ISO9001:2008 Quality System Certificate, SGS Quality System Certificate, ndi kasamalidwe kamakono.Anping Dongjie Wire Mesh Products Factory idakhazikitsidwa mu1996ndi over5000sqm malo.

    Tili ndi zambiri kuposa100antchito akatswiri ndi4ma workshop akatswiri: malo ochitira zitsulo ma mesh workshop, malo opangira ma perforated, stamping wire mesh workshop, nkhungu zopangidwa, ndi zokambirana zakuya.

    VI.Kupanga ndondomeko

    1-zinthu

    Zakuthupi

    2-kugunda

    Kukhomerera

    3-mayeso

    Yesani

    4-mankhwala mankhwala

    Chithandizo chapamwamba

    5-chomaliza chomaliza

    Chomaliza

    6-kunyamula

    Kulongedza

    7-kutsitsa

    Kutsegula

    Zopanda banga

    Chitsulo chosapanga dzimbiri

    Chitsulo chosapanga dzimbiri ndi zinthu zomwe odana ndi dzimbiri mpweya, nthunzi, madzi ndi asidi, alkali, mchere, ndi zina mankhwala dzimbiri sing'anga.

    Chitsulo choletsa zala

    Electro-galvanized steel

    Electro-Galvanized steel (SECC) ndi mtundu wa pepala lopaka utoto.

    Pambuyo popitilira chithandizo cha electro-galvanizing pamwamba pa zitsulo zotayidwa, chitsulocho chidzakhala chosalala kwambiri ndi kulekerera kochepa.

    Zokhala ndi malata

    Chitsulo chagalasi

    Chitsulo chopangidwa ndi galvanized ndi chitsulo chopangidwa ndi zinc pamwamba.

    Ntchito ya galvanizing ndi kuteteza dzimbiri pamwamba pa pepala zitsulo ndi kuwonjezera moyo.Poyerekeza ndi chitsulo wamba, malata amapangitsa chitsulo kukhala cholimba komanso chocheperako.

     

    VII.FAQ

    Q1: Mungafunse bwanji za Perforated Metal Mesh?
    A1: Muyenera kupereka zakuthupi, kukula kwa dzenje, makulidwe, kukula kwa pepala, ndi kuchuluka kwa zomwe mungapemphe.Mukhozanso kusonyeza ngati muli ndi zofunikira zapadera.
    Q2: Kodi mungapereke chitsanzo chaulere?
    A2: Inde, titha kupereka zitsanzo zaulere mu theka la A4 kukula limodzi ndi kabukhu lathu.Koma mtengo wotumizira udzakhala kumbali yako.Tikutumizirani mtengo wa courier ngati muitanitsa.
    Q3: Kodi Nthawi Yanu Yolipira ili bwanji?
    A3: Nthawi zambiri, nthawi yathu yolipira ndi T / T 30% pasadakhale ndi ndalama 70% musanatumize.Malipiro ena tingakambiranenso.
    Q4: Kodi nthawi yanu yobereka ili bwanji?
    A4: Nthawi yobweretsera nthawi zambiri imatsimikiziridwa ndi ukadaulo komanso kuchuluka kwa zinthu.Ngati zili zofunika kwa inu, tithanso kulumikizana ndi dipatimenti yopanga zinthu za nthawi yobweretsera.


  • Zam'mbuyo:
  • Ena:

  • Lembani uthenga wanu apa ndikutumiza kwa ife